ZLK type non-contact master control switch
I.OVERVIEW
ZLX-type non-contact switch as a master control automation group Hydrogenerator turbine components to reflect I.Kai-Qi Ye degrees and in different locations opening of the output signal corresponding contact.
Magnetic memory from the device and the magnetic switch contact group composed of two magnetic contact with the guide pole relay,magnetic memory installed in the switch group relay rack (see figure).I.Kai-Qi Ye of changes in the relay with a head-rod movement together.Head end of the switch and memory group stainless steel casing to maintain 2-6 mm distance between the parallel movement.When the head near a mobile memory switch,the switch contact sent signals,and contact memory moves down.Each switch are a regular set,a normally closed switch each other.This type of master switch for the non-contact type of new products,simple structure,testing links between magnetic alone,without any mechanical contact,and there is no resistance card,work is very reliable.
Second,technical data
1,Model specifications (see table)
Relay Range
Contact number
Master Switch Model
2,contact capacity:
DC100W:Maximum of 220 V or A maximum of 0.5
AC200VA:Maximum of 220 V or A maximum 1
Third,installation and adjustment
1,the group will switch memory location in the shell firmly installed relay bracket.
2,on the attached map correctly install magnetic contact.
3,Individual adjustment of the location of each memory switch,it will be convenient for the whole of the signal location.If not adjusted itinerary extreme position,stepped down can lead splint will be adjusted out of memory to switch some distance.
4,structure and installation plans
1,mounting holes
2,Magnetic Memory Switch
3,relay rack
4,Relay-pointer
5,relay rod
6,magnetic contacts
7,Model